HI-FREQUENCY PRESSURE TRANSDUCER Series 102AWith built-in amplifier
1.Acceleration-compensated ultra-rigid quartz element.
2.Frequency-tailored non-resonant, one micro-second response.
3.Ground isolation 3/8-24 threaded mount.
4.High level (5V), low-impedance (100 ohm) analog output.
5.Operation thru ordinary coaxial cable.
6.Flush welded, flat diaphragm.
USED FOR:- Shock wave, blast, explosion, combustion, compression, actuation, pulsation, cavitation, ultrasonic, aerodynamic, hydraulic, fluidic and other such pressure measurement.
Shock tube result show these frequency-tailored transducer to be almost completely free of ringing and other internal resonance effects that can distort the signal.
The rigid structure of these sophisticated instrument contains a compression mode quartz element with an integral compensating accelerometer to reduce vibration sensitivity and suppress resonance effects. Nearby non-resonant behavior is primarily achieved by meticulously matching the resonant frequency as well as the acceleration sensitivity of the compensating element to that of the pressure sensing element. A minimum number of Quartz plates imparts structural integrity.
Connect With Us